设备名称 |
数量 |
单位 |
品牌 |
售后服务 |
型号 |
是否标配 |
规格配置 |
附件 |
DVT40-1MM |
1.00 |
个 |
Gigaprobes |
按厂家售后标准 |
HR20180324001 |
否 |
40 GHz Dual Probe Differential Multi-Mode TDR and S-Parameters Probe kit, comes in a durable box and contains following items:
Qty 2: 40 GHz TDR Probes (BW determined by VNA and de embedding SW
Qty 2: Custom Mount for connector body
Qty 2: Ultem Hand Insulated Hand Mount
Qty 1: 110mm tweezers
Qty 1: 50 ohm conv. kit
Qty 1: Model 10 SMA wrench
Qty 1: Probe pitch calibration tool with .8mm, 1.0mm & 1.27mm calibration holes
Qty 1: Desk -Top 5 x Micro-lens inspection station |
无
|
DVT40-GC-1MM-L |
2.00 |
个 |
Gigaprobes |
按厂家售后标准 |
HR20180324004 |
否 |
1mm pitch Ground Collar with 3 replacable spring loaded ground pin probes. Ground/Signal configurations: GSGSG, GSS, SSG, GSSG, SGS. Uses when ground on test baord is IN LINE with Signal and Ground pins on probe |
无
|
DVT40-GC-1MM-H |
2.00 |
个 |
Gigaprobes |
按厂家售后标准 |
HR20180324006 |
否 |
1mm pitch Ground Collar provides two angled .5mm OD pogo pins ground contacts mounted in "H" Pattern placed in the front or behind to existing signal probe tips. Used when Ground pad is behind signal pad on test board
The removable collar has a spacing of 1mm to the signal probes (with .4mm overdrive). |
无
|
DVT-SM Holder |
6.00 |
个 |
Gigaprobes |
按厂家售后标准 |
HR20180324003 |
否 |
Stackable Magnetic PCB Holder (recommend min 6. 4 to hold each corner of PCB 2 additional for putting under PCB where probed to keep board from bowing) |
无
|
DVT-CS-1 |
1.00 |
个 |
Gigaprobes |
按厂家售后标准 |
HR20180324005 |
否 |
1280x1024 (1.3 MP) microscope with long working distance and polarizer. Camera recommended when using DVT40 or DVT30 probes includes: AM4113ZTL Camera_DVT-FP100-HDM1 camera holder |
无
|
DVT-FP60 |
2.00 |
个 |
Gigaprobes |
按厂家售后标准 |
HR20180324002 |
否 |
Rigid arm probe manipulator with XYZ pitch 40TPI controls & magnetic base. Recommended for DVT40 GigaProbes |
无
|